-
10/100/1000M Gigabit POE Fiber Media Converter, Full-power technology, Max.30W, Supports line speed switching of all ports, Duplex-fiber/Single-fiber optional, 0-120KM optional
10/100M Ethernet Fiber Switch included one fiber optic port and 4~24ports of 10/100M Ethernet, Fully compatible with IEE802.3, IEEE802.3u, Supports super jumbo frame etc.
Super mini in size, Support one channel digitalized analog video and one reverse RS485 data uncompressed high quality transmission, Auto PAL/NTSC/SECAM Compatible,0-100KM optional
Featured product
- Super mini fiber media converter
- Fast fiber media converter
- Gigabit fiber media converter
- 1000M POE fiber media converter
- Super mini video fiber converter
- HD camera fiber converter
- SDI video fiber convertera
- HDMI video fiber converter
- Network Switch
- POE Ethernet Switch
- Industrial Self-healing POE Fiber Switch
- PDH optical multiplexer
- Data Fiber Optical Modem
- E1 Fiber Optical Modem
- 10/100M to E1 converter
- PLC Fiber Splitter
- MPO/MTP patch cord
- MPO/MTP Cassette
- SC Fiber Fast connector
- Surge Protector
- SFP module
- WIFI camera kit
Product>Fiber Patch Cord>MTP MPO LC/SC/FC/ST Fanout Fiber Patch Cord
MTP MPO to LC/SC/FC/ST Fanout Fiber Patch Cord
Brief introduction
MTP® MPO to LC/SC/FC/ST Fanout Fiber Patch Cord is type of multi-core cable assembly facilitate rapid deployment of high-density backbone cabling in data centers and other high fiber environment, reducing network installation or reconfiguration time and cost. MTP® MPO are used to interconnect cassettes, panels, or fan outs using a compact and rugged micro-cables structure. The compact cable optimizes cable way use and improve airflow. These MTP® MPO cable are built with the highest quality components, Low loss elite (premium) versions are offered accordingly.
Feature
●
High Speed and High Density-MTP® MPO to
LC/SC/FC/ST Patch Cable, (MPO Female Connector without PIN). Low insertion loss and back reflection loss process
● High durability, temperature stability and good exchangeability
● OS2, OM3, OM4, OM5 Optional
● Compliance with 10G, 40G and 100G protocols
● High-performance for Datacenter-IL at 850nm 25dB, Common configuration for connecting MTP® MPO cassettes and QSFP+ transceivers
● High-performance polishing machine, and complemented by precision plates holders designed for MT ferrules, 100% 3D interferometer provides verification of MTP® MPO polishing process
● Three types polarity optional: Type-A(straight through), Type-B(cross, flipped), Type-C(cross pair, rollover)
● Factory terminated and tested
● Available color for cable: OS2 Yellow, OM3 Aqua, OM4 Magenta, OM5 Lime Green
● Length of patch cable is optional
● Supports up to 8F, 12F, 24F, 48F, 72F, 96F, 144F, customized products are available
Specification
|
Fiber mode |
Multi-mode 50/125μm, Single-mode 9/125um |
|
Wavelength |
850/1300nm, 1310nm/1550nm(SM) |
|
10G Ethernet Distance |
400m |
|
40/100G Ethernet Distance |
150m |
|
Insertion Loss of MPO MTP |
0.30dB Typical(All Fibers),0.70dB Maxim (Single Fiber) |
|
Return Loss of MPO MTP |
>20dB(MM), >60dB(SM) |
|
Insertion Loss of LC/SC/FC/ST |
<0.3dB |
|
Return Loss of LC/SC/FC/ST |
PC:>45dB, UPC:>50dB, APC:>60dB |
|
Jacket material |
LSZH, PVC, OFNP optional |
|
Cable OD |
3.0mm |
|
Operating Temperature |
-40ºC to 75ºC |