• 10/100/1000M Gigabit POE Fiber Media Converter, Full-power technology, Max.30W, Supports line speed switching of all ports, Duplex-fiber/Single-fiber optional, 0-120KM optional
                 

  • 10/100M Ethernet Fiber Switch included one fiber optic port and 4~24ports of 10/100M Ethernet, Fully compatible with IEE802.3, IEEE802.3u, Supports super jumbo frame etc.  
                 

         

  • Super mini in size, Support one channel digitalized analog video and one reverse RS485 data uncompressed high quality transmission, Auto PAL/NTSC/SECAM Compatible,0-100KM optional              

         

Product>OLT/ONU>4ports GPON with CATV

4ports GPON with CATV

Brief introduction

    DLX-GN14V GPON ONU adopts mature optical fiber access network technology, which integrates the advantages of low cost, high bandwidth, strong expansibility and other advantages. It adopts the passive spectral network and point-to-multipoint structure, which changes the problems existing in the active optical network such as many fault points, difficult maintenance and high operating costs. It is a a user terminal device with multi-function product, independently developed by DLX in line with such industrial background. Support 4x10/100M/1000M Ethernet port and one CATV port. With compact structure and small appearance, it is a kind of FTTH GPON optical network unit with high performance and low power consumption, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.

Feature

Four 10/100M/1000M Gigabit Ethernet ports,One CATV port

Compliance with IEEE 802.3ah & ITU-T G.984.x standard

Upload/Download support wire speed forwarding

Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc.

Support 4094 VLAN(802.1Q)

Support Dynamic Bandwidth Allocation (DBA)

Support multicast IGMP v2 proxy/ snooping, support MLD proxy/ snooping

Support firewall level Settings, support based on URL/MAC/ IP/ address frame filtering

Qos supports PQ, WRR, and CAR queue scheduling

Support Ethernet port speed limit, loopback detection, Layer-2 isolation

Support alarm for power and update function for fault

Support remote reset and restart

Support restore to factory settings

Built in CATV RF module, support EOC

Specification

      Hardware Specifications

Size

140mm (L) *15mm (W) *35mm (H)

Optical signal access

1*GPON

User interface

4GE+1CATV

Indicator light

POWER/PON/LOS/LNTERNET /LAN1/LAN2/LAN3/LAN4

Weight

200G

Power adapter input

100V~240V AC,50Hz~60Hz

Power adapter output

12V DC,1.0A

Operation temperature

-30℃~+50℃

Storage temperature

-40℃~+70℃

Relative humidity

5-95% Non-Condensing

         PON Interface

Module type

SC/PC,SC/APC

TX Optical power

0.5~4dbm

Receiving Sensitivity

-26dBm

Transmission distance

0~20km

Transmission rate

down 2.488Gbps,up 1.244Gbps

        Ethernet interface

Interface type

RJ45

Interface parameters

4*10/100/1000Mbps