• 10/100/1000M Gigabit POE Fiber Media Converter, Full-power technology, Max.30W, Supports line speed switching of all ports, Duplex-fiber/Single-fiber optional, 0-120KM optional
                 

  • 10/100M Ethernet Fiber Switch included one fiber optic port and 4~24ports of 10/100M Ethernet, Fully compatible with IEE802.3, IEEE802.3u, Supports super jumbo frame etc.  
                 

         

  • Super mini in size, Support one channel digitalized analog video and one reverse RS485 data uncompressed high quality transmission, Auto PAL/NTSC/SECAM Compatible,0-100KM optional              

         

Product>PDH Optical Multiplexer>4E1 PDH Optical Multiplexer

4E1 Fiber Optical Transmitter and Receiver(4E1 PDH multiplexer)

Brief introduction

    DLX-OP04 4E1 fiber optical transmitter and receiver is a photoelectricity syncretic transmission apparatus with 120 channels (be equal to 120 voice channels). It takes GSI as core and provides E1 transmission which is suit to telecommunication. Offers 4 channels E1 ports, and one channel official telephone. one channel RS232,V.35,10/100base-t can been optional. Supports full network management function. It adapts to switch group network of small capacity, loop network, mobile communication (base station), special network, DDN and so on.

Feature

Adopts large-scale integrate chip, brief circuit, low power consumption and high reliability structure

Offers four channels E1 ports, and one channel official telephone

Offers service telephone port for the convenience of installation and maintenance

Possess the function of give a alarm by sound

Provides one network management port, possess full concentrated network management function, convenient to configure the network and high security

Possess complete alarm and state indication function

Adopts manifold power supply: -48VDC or 220VAC

Specification

      Optical index

Wavelength

850nm/1310nm(Multi-mode),1260~1360,1470nm~1610nm (Single-mode)

Space of wavelength

20nm

Optical power

0 dBm ~ -3dBm/-5dBm ~ -10dBm

Number of fiber

One or two

Receiving Sensitivity

≤-36dBm

Connector

FC(SC/ST optional)

Transmission distance

20KM (maximum distance:120KM)

        E1

Line code

HDB3

Bit rate

2048KBIT/S±50ppm

Standard

ITU-TG.703

Line impedance

75ohm(unbalance),120 ohm(balance)

Connector

BNC for 75ohm, RJ45 for 120ohm

        RS232

Working manner

≤19.2KBIT/S asynchronous serial manner

Connector

RJ45

         Environmental

Operation temperature

-30℃~+50℃

Storage temperature

-40℃~+70℃

Relative humidity

0-95% Non-Condensing

MTBF

 ≥10e5 hours

Power Supply

DC 48V or AC 220V

         Physical Dimensions

19inch 1U type

480(L) x 140(W) x 45(H)mm


-----------------------------------------------------------------------------------------------------------------------------------------------------------

Types for order, Please find in the PDF file