Products>Fiber Optical Modem>E1 Fiber Optical Modem

DLX-E1F  E1 Fiber Optical Modem

Product Introduction

       DLX-E1F E1 Fiber Optical Modem is a point to point of high capability Terminal with capacity of 30 voice channels. This Terminal offers one channel of asynchronous data channels except 2MBIT/S channels which compatible with ITU-T/G.703.It can be used as relay communications device of LAN, especially adapt to base station of mobile radio communication network to use as optical fiber transmission Terminal and hired equipment. It is small in size and has very light weight. The exterior frame is very compact and looks well. Possess characters of easy installation and adjustment free, high quality of transmission and high reliability of working.

Product Feature

●    Adopts large-scale integrate chip, brief circuit, low power consumption and high reliability structure

● Offers one channel E1 port 

●     Possess complete alarm and status indication function

● Adopts manifold power supply: -48V DC or 220V AC

Technologies reference

●     Fiber type: Single-mode fiber or Muti-mode fiber

●     Fiber wavelength: 1310nm, 1550nm or 850nm optional

●     Fiber interface: SC, FC or ST optional

●     Optical line code: 1B1H

●     Data rate: 4096KBIT/S

●     Fiber module: Single Strand module or Double Strand module 

●     Output optical power: －8DBM～-15DBM

●     Receiving sensitivity: ≥－36DBM

●     Transmission distance: 20KM (maximum distance: 120KM))

●    E1 character:

Line code: HDB3

Bit rate: 2048KBIT/S±50ppm

Standard: ITU－TG.703

Line impedance : 75ohm(unbalance)

Connector: BNC

●Power

Voltage：180V～240V AC，－36V～－72V DC

Power consumption: ＜5W

●Working environment:

Operating temperature: 0℃~50℃

Storage temperature: -40℃~70℃

Environment humidity: 5~90%(non-condensing)

Atmospheric pressure: 86～106KPA

● Dimension: 200mm×140mm×35mm

Types for order, Please find in the PDF file